Thermal disinfector HYG 5 – specializing in podiatry

Dimensions (HxWxD) 7.2 x 40.2 x 42.4 cm

You can easily place podiatry instruments in the lower basket. The basis is our Flexio organization system, which allows a load of up to 6 kg.

Our SURGERY equipment package includes the universal holder. It can hold up to 21 scissors, clamps and pliers; with two holders so up to 42. In one run.

The small universal holder can hold a further 11 instruments, including scissors, pliers or head cutters.

Dimensions (HxWxD) 3.1 x 10.2 x 36.0 cm

Process up to 70 cutters and grinders per batch in the system carrier: This is made possible by the flexible silicone holders for easy mounting. Thanks to the secure locking, the cutters and grinders remain reliably fixed throughout the entire preparation process and the cutting edges are well protected. The individual carrier can be equipped with 7 instruments directly in the treatment room. In the same carrier, cleaning and disinfection takes place in the RDG and finally sterilization in the B-class autoclave. Our system carrier set contains 10 individual carriers.

Dimensions of the mono holder: (HxWxD) 4.4 x 11.4 x 13.5 cm

Inner diameter multibox: 10.4 cm, mesh size: 1.2 mm

Podiatrists in particular love the Multibox: With it they can easily process small parts such as sanding caps or polishing discs without causing them any damage.

Dimensions (HxWxD) 4.8 x 37.5 x 43.7 cm

You can load the upper basket with up to 6 kg of instruments. Thanks to a 100% basket extension, it can be brought in comfortably. Possible instruments are tweezers, pliers, scissors, nail lifters, curettes, files or blade holders; They can be freely placed in the upper basket and processed safely.

Optionally we offer you the 10×10 sieve basket. You can use it to make additional divisions in the upper basket.

The first use for thermal disinfectors that can accurately hold medical instruments such as: mirrors, tweezers, probes, etc. horizontally. This ensures the best possible flushing during cleaning and disinfection. The instrument insert is preferably for the upper basket, but can also be placed in the lower basket if there is space for it. Suitable for thermal disinfectors from Miele, Melag, W&H, IC Medical and many others.

The IC Medical Printer documentation software included in the scope of delivery ensures legally compliant process documentation with all prescribed parameters. For greater convenience, batch release takes place directly on the device display of the thermal disinfector. The IC Medical Printer software is installed on your practice computer or network. The data can be easily read and archived using the included USB stick or via a direct network connection. Complete. We will integrate it into your practice software free of charge. Interfaces to Segosoft, DIOS and DOCma are available.

Thanks to our Flexio organization system, all equipment packages can be individually adapted to your practice needs. With over 50 other items such as baskets, adapters, holders and inserts, we will find the right solution for your requirements. Simply contact us: vertrieb@icmedical.de / Telephone 07181-70 60 70.

We have developed innovative pump technology and a new water supply system for our HYG 5. Both ensure the cleaning and disinfection of the external surfaces of your instruments. And it ensures the disinfection of all interior spaces of the hollow body instruments used.

The HYG 5 as an under-table or built-in device offers you extremely comfortable loading with the new interior concept. The upper basket is 100 percent extendable and can hold up to 6 kg of medical instruments. In total, the HYG 5 can process three autoclave loads per cycle. This benefits the entire workflow and reduces effort costs.

Our thermal disinfector HYG 5 processes even demanding batches reliably, quickly and safely; even complex hollow bodies. The construction is stable and powerful. Two preparation levels enable greater flexibility and a smooth process. Even when there are high or changing instrument requirements, the HYG 5 delivers full power with the shortest preparation time.

Our proven and popular Oxides ThermoTabs standardize and make your processing process much easier. The dosage and concentration of the cleaning components are consistent and perfectly coordinated. The storage effort is reduced enormously and incorrect dosages are eliminated. Simply.

With our IC HotDrying process, the HYG 5 achieves optimal drying results. Once opened, you have stain-free instruments in your hands, just the way you need them.

The visual inspection is mandatory. With the HYG 5, we make batch release even easier for you: you can then release it directly on the device display. Our software transfers the release to the batch record at the same time.

Safe instrument reprocessing includes legally compliant process documentation with all prescribed parameters. The HYG 5 offers you interfaces to easily read and archive the data via a network connection or USB stick. We provide our IC Printer documentation software for this purpose. In addition, the documentation can be integrated into your existing practice software via other interfaces (Segosoft, DOGma (DIOS)).

Fully demineralized water sustainably ensures the maximum service life of your devices and instruments. For full desalination we offer the IC ion exchange cartridge.
Read more about device-friendly water treatment: Everything you need to know about water treatment.
The IC Touch Control Display of the HYG 5 shows you immediately when the performance of your VE cartridge is exhausted. Alternatively, your batch record provides information about this.

To operate the HYG 5 thermodisinfector you only need:

• Power connection 220…240V; 50/60Hz; 16A
• Cold water connection 3/4 inch
• Wastewater connection DN19
• Fully desalinated water

With the injection system from IC Medical, the media paths for air and water can be flushed specifically and thoroughly, even with the narrowest lumen, as well as the entire internal surfaces including the instrument heads. This succeeds...

If the silicone sockets of your Flexio adapter have become worn and discolored over time, we recommend replacing them with new silicone blanks. This ensures a firm hold and reliable flushing and flushing without reducing your cleaning results or losing your valuable ZEG tips in the pump sump.

We offer an M8x1 threaded coupling for the injection rails of many thermal disinfectors especially for the dental sector. This threaded coupling enables the Flexio adapter to be adapted to ZEG tips in accordance with the regulations.

We offer blind plugs especially for the Flexio injection rail with 8 adapters to close unused hollow body connections.

The adapter for hollow body instruments with an outer diameter of 22 mm can be adapted to our injection splint. Particularly suitable for handpieces with 22 mm. Also compatible with other thermal disinfectors with injection rails, for this you only need our M8x1 threaded coupling.

The adapter for hollow body instruments with an outer diameter of 23 mm can be adapted to our injection splint. Particularly suitable for handpieces with 23 mm and powder jet devices. Also compatible with other thermal disinfectors with injection rails, for this you only need our M8x1 threaded coupling.

The Cavitron adapter is one of our components on the injection rails of the HD 450 Injection PRO and the HYG series for cleaning hollow body instruments. As an adapter for Cavitron handpieces with a 16 millimeter diameter...

The Flexio universal hose adapter 4-6 mm is ideal for adapting surgical instruments. With the help of the medical silicone tube, this adapter can be used, for example, for surgical suction devices on the...

The Flexio medical silicone tube can be used for hygienic preparation on the injection rail with the help of the Flexio universal tube adapter with 8 adapters. It is also possible to adapt, for example...

Der Siebkorb 10x10 bietet die Möglichkeit, Kleinteile, Zangen sowie Spekulahalter aufzunehmen und vorschriftsgemäß aufzubereiten.

Up to 72 standing instruments can be hygienically processed in the instrument holder insert. In addition, 8 additional and larger compartments offer space for vacuum cleaners and pliers.

The first use for thermal disinfectors that can accurately hold medical instruments such as: mirrors, tweezers, probes, etc. horizontally. This ensures the best possible rinsing during cleaning and disinfection....

The Flexio drill stand 39 with a total of 156 slots is made of robust stainless steel. Our set contains four drill containers, each with 39 slots, which can be equipped directly in the individual treatment rooms, in...

The plug-in system for rotating instruments and mirror attachments can be integrated in a single version into the system carrier with 5 slots or in two versions in the system carrier with 10 slots.

The Flexio system carrier offers the option of attaching five plug-in systems for rotating instruments or ear speculas.

The plug-in system for ear specula can be integrated in a single version into the system carrier with 5 slots or in two versions in the system carrier with 10 slots.

The Flexio Universal impression/spoon holder is suitable for the hygienic preparation of impression trays, especially in the dental field, as well as for other medical instruments.

Up to 60 nasal speculas can be prepared in the nasal specula holder. You can also use it to hygienically process other medical instruments (up to 60 utensils).

The Flexio universal holder offers the possibility of preparing up to 4 speculas, 11 pliers or other medical instruments.

The Flexio universal holder offers the possibility of preparing up to 8 speculas, 21 pliers or other medical instruments.

The Flexio holder MONO for holding a small parts container. The holder can be locked in both the basic basket and the 10x10 sieve basket. The Flexio holder can be equipped with a ball or multibox.

The Flexio holder DUO for holding two small parts containers. The holder can be installed in both the basic basket and the 10x10 sieve basket. The Flexio holder can be equipped with a ball or multibox.

The fine-meshed Flexio small parts container "Ball" offers the option of storing small parts such as drills, matrices,...

The coarse-meshed Flexiro Multibox small parts container offers the option of storing small parts such as drills, matrices,…

The Flexio tray holder offers the option of holding 7 trays. The trays may be a maximum of 4.5 cm wide.